Q376 Single Hook Spinner Hanger Blast Machine for Cleaning Castings Dimension Dia.600mm Height 1200mm
Quick detail
| Workpiece Description | Max part dimension | Φ600*1200mmH |
| | Max part weight | ＜600kg |
| Cleaning requirement | Meet standard of GB8923-88 A-B Sa2½, surface roughness Ra12.5 |
| | |
| Time of cleaning one hook | Casting 8-15min; Forging 5-8min |
| Noise Level | ≤85 dB |
| Dust Emission | ≤80 mg/m³ |
| Recommend Abrasive | Φ0.2～Φ1.0mm steel cut wire or steel shot |
| Abrasive Initial Feed | 1.0-1.5T |
| Machine Footprint | L2730mm*W5760mm* H4690mm |
| Pit Foundation | Not required |
| Compressed Air Consumption | <0.6m3/min; 0.4Mpa~0.6Mpa |
| Power Consumption | 29kw |
Application possibilities
TS Spinner Hanger Machines are designed to clean a wide range of parts size and shapes. These shot blasting machines can be set up with dual swing doors, I or Y hanger and with multiple blast wheels. Parts are loaded onto a hanger and moved in, started rotating, got blasted and moved out.
Widely used in small and medium size of stainless steel parts, castings, die castings, forgings, welding structures and heat treatment parts surface cleaning and strengthening.
Advantages of using TS Spinner Hanger Machine
- High throughput with optimum Blast coverage, getting good cleaning result
- Using Mn13 wear-resistant steel plate as the protective plate, which effectively improves the service life of shot blasting chamber.
- Equip with pulse-jet reverse air blowing system on dust collector, automatic clean the cartridges
- Good sealing device prevent shot escape
- Small machine footprint with flexible design
Machine Introduction
It is composed by shot blasting cabinet, blasting system, electrical hanger system, rotation system, abrasive recovery system, dust removal system, electrical control system and so on.
Blast Cabinet
This machine equips with thickness 6mm wear-resistant manganese steel plate Mn13 as protective.
Blast Wheel 7.5kw x 2pcs
Hanger System
Rotation speed 2.8r/min
Motor Power 0.55kw
Moving power 0.2 kw
Moving speed 14 m/min
Lifting power 1.5 kw
Lifting speed 4 m/min
Max loading 600kg
Abrasive Recovery System 3.0kw
Catridge Dust Collector 4.0kw Filtering Area 56m2
Pulse-jet Air Clean System: The dust collector has a programmable time board to “pulse” the cartridges with a jet of compressed air between blast cycle to purge the filter.
Electrical Control System 380V/50Hz/3phase (Customize)
If you can't find suitable model, please feel free to contact with our sales team.
Product Tags:
|
|
Single Hook Automatic Shot Blasting Machine , Castings Cleaning Shot Blasting Equipment Images
|
